Guide for safe use of car lift

While the car lift facilitates the repair and maintenance of the car, it is necessary to pay attention to the use safety of the car lift. Here is a guide for the safe use of the car lift.

1. Because the car lift is operating in the air for a long time, it is necessary to ensure that the staff are not in the working area of the lift before using the car lift.

2. After driving the car into the support frame of the lift, make the car completely locked by the side arm of the lift. After starting the button, make the lift rise. When the lift is raised, observe the support frame of the lift. The staff should not work under the support arm.

3. When the car lift lifts the car and stops at a convenient position, the staff can enter under the car lift to carry out work. At this time, if the center of the car is found to be offset. You should press the down button to reposition and lift the car.

4. If the vehicle is still in an unstable state during a lift, further confirm that the locking teeth are enough to unlock, lower the support arm of the car lift, and re-fix the vehicle.

5. After the maintenance vehicle is fixed and stable, check the locking position. If the vehicle is not in the locking position, lower the support frame to ensure it is in the fixed position.

6. When the vehicle to be repaired has completed the operation, before pressing the lowering button, it is necessary to check the stability of the vehicle again to ensure that there is no one in the area under the car lift before the lowering operation.